Filter – HP 40
Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pumps flow up to 30% and cause possible overheating.
Filter – HP 60/80
Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pumps flow up to 30% and cause possible overheating.
Filter – XP 40/60/80
Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pumps flow up to 30% and cause possible overheating.
This filter fits all pumps in the XP series.
Full Service Kit – XP 40/60/80
This is a full service kit, which includes all commonly changed items and includes; a pair of valve chambers, diaphragms in their mounts, air filter, jig and fixings for the XP 40/60/80.
Please change all items during the process, using the jig to change one diaphragm after another.
For instructions on how to replace these items, please see our ‘downloads’ page or call our office.
Full Service Kit HP 100/120
This service kit is suitable for an HP-100 & HP-120.
It includes all commonly changed items; a pair of valve chambers, diaphragms in their mounts, air filter, SP Pin and fixings.
Please change all items during the process.
For instructions on how to replace these items, please see our ‘downloads’ page or call our office.
Full Service Kit HP 150/200
This service kit is suitable for an HP-150 & HP-200.
It includes all commonly changed items; a pair of valve chambers, diaphragms in their mounts, air filter, SP Pin and fixings.
Please change all items during the process.
For instructions on how to replace these items, please see our ‘downloads’ page or call our office.
Full Service kit HP 60/80
This service kit is suitable for an HP-60 & HP-80.
It includes all commonly changed items; a pair of valve chambers, diaphragms in their mounts, air filter, SP Pin and fixings.
Please change all items during the process.
For instructions on how to replace these items, please see our ‘downloads’ page or call our office.
Full Service Kit- HP 30/40
It includes all commonly changed items; a pair of valve chambers, diaphragms in their mounts, air filter, and fixings.
Please change all items during the process.For instructions on how to replace these items, please see our ‘downloads’ page or call our office.
Inverter – Single –> 3ph up-to 1.5kw motor
Where only single phase is available on site, the temptation is to choose a single phase motor, or worse; a three phase motor with a capacitor across the supply.
Both these options result in motors overheating, underperforming & failing.
The correct solution is to fit an inverter in conjunction with a suitably powerful 3ph motor, so spreading the current draw three ways. This ensures the motor does not overheat, works at its most efficient & maximises lifetime of both motor & blower.
Omron invertors offer the highest quality, and are Elektror’s preferred supplier for use with their blowers.
These inverters can only be purchased in conjunction with a blower and will be shipped from Elektror Germany.
Inverter – Single –> 3ph up-to 2.2kw motor
Where only single phase is available on site, the temptation is to choose a single phase motor, or worse; a three phase motor with a capacitor across the supply.
Both these options result in motors overheating, underperforming & failing.
The correct solution is to fit an inverter in conjunction with a suitably powerful 3ph motor, so spreading the current draw three ways. This ensures the motor does not overheat, works at its most efficient & maximises lifetime of both motor & blower.
Omron invertors offer the highest quality, and are Elektror’s preferred supplier for use with their blowers.
These inverters can only be purchased in conjunction with a blower and will be shipped from Elektror Germany.
Inverter – Single –> 3ph up-to 3.0kw motor
Where only single phase is available on site, the temptation is to select a single phase motor, or worse; a three phase motor with a capacitor across the supply.
Both these options result in motors overheating, underperforming & failing.
The correct solution is to fit an inverter in conjunction with a suitably powerful 3ph motor, so spreading the current draw three ways. This ensures the motor does not overheat, works at its most efficient & maximises lifetime of both motor & blower.
Omron invertors offer the highest quality, and are Elektror’s preferred supplier for use with their blowers.
These inverters can only be purchased in conjunction with a blower and will be shipped from Elektror Germany.
Large Lake Aeration Kit
This kit supplies 400lr/min of air through 40m of self-weighted hose to 4 x 1 metre fine-bubble air diffusers. All fittings are included.
Suitable for large areas of water.
If you would like to personalise the kit by adding pumps/diffusers or pipe then please contact us and we can design an aeration kit just for you.
Hiblow pumps come with a 2 year warranty.